Seamless Knitted Gloves
Cotton knitted seamless gloves. Lightweight gloves with excellent resistance to abrasion and enhanced grip.
Available in 10 gauge.
Seamless knitting construction eliminates uncomfortable seams that can rub , tear or chafe.
Colour coded overlock binding .
100% cotton makes feel comfortable to the user.
PVC dotting enhances grip.
100% cotton yarn.
Ambidextrous gloves: Indifferent to each hand.
Coloured binding prevents yarn edge from fraying and colour of the overlock binding is used to define different size of the gloves.
PRODUCT MAKE :
Material : 100% Cotton
Cuff : Coloured binding
Yarn Count : 10S
Lining : None
Piping : None
SIZE: Universal 6 7 8 9 10 11
INDUSTRY / JOB: Automobile & Auto Ancillary, Healthcare, Construction & Civil, Repairs & Maintenance
HAZARD / RISK: Dust, Abrasion
PRODUCT WEIGHT: 625 gms per dozen pair
( Weight of product may vary depending on customisations )
MINIMUM ORDER QUANTITY :
Custom : --
Ready Made : 600 Pairs
HOW TO USE
Store in a cool dark place, in its original packing.
No special cleaning or maintenance is recommended for these types of gloves.
Abrasion as per EN 388 is 1: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
Cut as per EN 388 is X: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5
Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample.The protection factor is then indicated on a scale from 1 to 4.
Puncture as per EN 388 is X: Puncture resistances based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.
TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine.Weight is added to serve as force.The blade moves across the fabric.The blade is replaced with a new one to ensure accuracy.The sample is cut five times, each with three different load.The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
100% cotton provides comfort.
This glove can be used effectively to resist abrasion and dirt.
Lightweight gloves along with binding ensure comfort.
Colour coded overlocks to identify different sizes (07 - Red, 08 - Yellow, 09- Brown, 10- Black).