Seamless Nitrile Gloves
Unsupported flock lined nitrile dipped gloves.
Cotton flocklined unsupported nitrile gloves, offers added comfort and better absorption of perspiration.
Raised diamond pattern grip.
Specially designed contour shape ensures better dexterity.
Patterned palm and fingers give excellent grip in both wet and dry condition.
Good protection from hydraulic fluids, organic acids and alkalies, at palm area when compared to ordinary gloves.
Unsupported green coloured nitrile gloves.
Length: 13 inch, Thickness: 15 mil
Good protection from hydraulic fluids, gasoline alcohols, organic acids and alkalis, at palm area when compared with ordinary gloves.
PRODUCT MAKE :
Liner: Flock lined with cotton dust
Coating : Nitrile
Fabric/Material : Flock lined
Piping : None
SIZE: Universal 6 7 8 9 10 11 12
INDUSTRY / JOB: Pharmaceutical, Chemical & Paint, Biotechnology, Hospitality & Housekeeping, Material Handling, Oil, Gas & Petrochemical
HAZARD / RISK: Chemical Splash, Biohazard, Cut, Oil, Puncture
PRODUCT WEIGHT: 792 gms per dozen pair
( Weight of product may vary depending on customisations )
MINIMUM ORDER QUANTITY :
Custom : 1000 Per Dozen Pair
Ready Made : 120 Pairs
HOW TO USE
Store in a cool, dry place, away from frost and light ion their original packaging.
No specific cleaning or maintenance is required for this type of gloves.
Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
Cut as per EN 388 is 1: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
Tear as per EN 388 is 0: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
Puncture as per EN 388 is 1: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
Nitrile provides usefulness in an oily and slippery environment.
These gloves can be used effectively to resist chemical and abrasion hazard.
Excellent abrasion resistance due to the double effect of nitrile coating and PVC dotting on it.