Seamless Knitted Gloves
Cut resistant level 5 seamless knitted gloves. Yarn blended with UHMWPE & SPANDEX based fibre.
Cut resistant level 5 seamless knitted gloves blended with glass.
Glove provides durable hand protection and supreme cut resistance with outstanding dexterity.
13 Gauge gloves are made with glass and UHMWPE based blended yarn offer mechanical resistance.
UHMWPE and glass based fiber yarn.
Ambidextrous gloves: Indifferent to each hand.
Coloured binding prevents yarn edge from fraying and colour of the overlock binding is used to define different size of the gloves.
Open back configuration provides superior ventilation.
PRODUCT MAKE :
Material : UHMWPE and glass based fibre
Cuff : Coloured binding
Yarn Count : 640 D
Lining : None
Piping : None
SIZE: Universal 6 7 8 9 10 11
INDUSTRY / JOB: Glass & Ceramic, Mining & Metallurgy, Manufacturing, Construction & Civil
HAZARD / RISK: Cut, Abrasion, Dust
PRODUCT WEIGHT: 627 gms per dozen pair
( Weight of product may vary depending on customisations )
MINIMUM ORDER QUANTITY :
Custom : --
Ready Made : 144 Pairs
HOW TO USE
Store in a cool dark place, in its original packing.
No special cleaning or maintenance is recommended for these types of gloves.
Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
Cut as per EN 388 is 5: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5
Tear as per EN 388 is 4: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
Puncture as per EN 388 is X: Puncture resistances based on the amount of force required to pierce the sample with a standard sized point. The protection factor is then indicated on a scale from 1 to 4.
TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance travelled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.