Seamless Knitted Gloves
Highcut resistant knitted seamless gloves, with split leather patch reinforced palm .
10 gauge ensures sufficient dexterity requirement for all kinds of material handling.
Seamless knitting construction eliminates uncomfortable seams that can rub, tear or chafe.
Open back configuration provides superior ventilation.
Ergonomically correct design conforms snugly to the natural shape of the hand, increasing comfort and reducing hand fatigue.
Colour coded overlock binding helps to indentify different sizes (07 - Red, 08 - Yellow, 09 - Brown, 10 - Black).
Level 3 Blade cut resistance gloves makes easier to work with sharp edged objects e.g. Machine blade, glass, installing barb wire Fence etc.
PRODUCT MAKE :
Material : UHMWPE
Cuff : Coloured binding
Yarn Count : 400D/PE 140D/Spandex 100D/Glass fiber 100D*2/ Polyester
Lining : None
Piping : None
SIZE: Universal 6 7 8 9 10 11 12
INDUSTRY / JOB: Construction & Civil, Automobile & Auto Ancillary, Healthcare, Material Handling, Repairs & Maintenance, Warehousing & Assembling
HAZARD / RISK: Cut, Puncture, Abrasion, Dust, Slip, Heat
PRODUCT WEIGHT: 720 gms per dozen pair
( Weight of product may vary depending on customisations )
MINIMUM ORDER QUANTITY :
Custom : 1000 Per Dozen Pair
Ready Made : 600 Pairs
HOW TO USE
Never leave to dry close to or on top of a heat source.
Not advised to be used for more than 8 hours at a stretch.
Not advised to wash with soap and water since they remove natural oils present in the leather, causing them to stiffen and become brittle.
Advised for dry cleaning.
Store in a cool, dry place, away from frost, packed in their original packages.
Not advised to deal with moving parts of a machine wearing these gloves.
Abrasion as per EN 388 is 4: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
Cut as per EN 388 is 5:The blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
Tear as per EN 388 is 4: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
Puncture as per EN 388 is 3: Puncture resistances Based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.
Nitrile provides usefulness in an oily and slippery environment.
These medium weight gloves can be used effectively to resist chemical and abrasion hazard.