Seamless Nitrile Gloves
Unsupported unlined Nitrile glove.
Flock lined blue-yellow bi-coloured unsupported Neoprene blended gloves .
Available with Raised diamond pattern and grip.
Good protection from hydraulic fluids, gasoline alcohols, organic acids and alkalis, at palm area when compared with ordinary gloves.
Gauntlet style ensures protection against dust.
Raised diamond pattern grip gives excellent grip in both wet and dry condition.
Specially designed contour shape ensures better dexterity.
PRODUCT MAKE :
Coating : Neoprene
Fabric/Material : Flock lined (Cotton Dust)
SIZE: Universal 6 7 8 9 10 11 12
INDUSTRY / JOB: Oil, Gas & Petrochemical, Chemical & Paint, Hospitality & Housekeeping
HAZARD / RISK: Cut, Abrasion, Puncture, Chemical Splash, Biohazard, Oil
PRODUCT WEIGHT: 1080 gms per dozen pair
( Weight of product may vary depending on customisations )
MINIMUM ORDER QUANTITY :
Ready Made : 144 Pairs
HOW TO USE
Store in a cool, dry place, away from frost and light ion their original packaging.No specific cleaning or maintenance for this type of glove.
Abrasion as per EN 388 is 2: Resistance to abrasion Based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the glove.
Cut as per EN 388 is 1: Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5
Tear as per EN 388 is 0: Tear resistances Based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4
Puncture as per EN 388 is 1: Puncture resistances Based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4
EN 374-2: Protection against Micro Organism Risks: The standard EN 374-2 specifies a test method for the penetration resistance of gloves protecting against chemical products and/or microorganism when the gloves resist penetration, they are tested according to this part of EN374-2, and they provide an effective barrier against microbiological risks
EN 374-3: Protection against Chemical risks: The standard EN374-3 involves a determination of the resistance of the materials making up the gloves to permeation by non-gaseous chemical product which are potentially hazardous in case of continued contact. Emphasis is therefore placed on the fact that this does not take into account conditions which are likely to be encountered an actual working condition. It is therefore recommended to only use the test results, which have basically relative values, to compare the materials on the basis of the major categories of a passage of time. Primary chemicals against which mainly the tests have done: A- Methanol; J- n-heptane, K- Sodium Hydroxide 40%; L- Sulphuric Acid 96%. Though these gloves can sustain against other harmful chemicals also.